Ma Qian

Publications

• Improving the accuracy and reliability of temperature field simulation during laser metal deposition
• Architectured hierarchical porous metals enabled by additive manufacturing
• Robust bulk micro-nano hierarchical copper structures possessing exceptional bactericidal efficacy
• Geometrical parameters and mechanical properties of Ti6Al4V hollow-walled lattices
• Simulation-informed laser metal powder deposition of Ti-6Al-4V with ultrafine α-β lamellar structures for desired tensile properties
• Microstructure, tensile properties and deformation behaviour of a promising bio-applicable new Ti35Zr15Nb25Ta25 medium entropy alloy (MEA)
• Thermodynamic and Kinetic Analyses of the Removal of Impurity Titanium and Vanadium from Molten Aluminum for Electrical Conductor Applications
• Buckling phenomena in AM lattice strut elements: A design tool applied to Ti-6Al-4V LB-PBF
• Coupling effects of high magnetic field and annealing on the microstructure evolution and mechanical properties of additive manufactured Ti–6Al–4V
• Hollow-walled lattice materials by additive manufacturing: Design, manufacture, properties, applications and challenges
• Development of core–shell-structured Ti-(N) powders for additive manufacturing and comparison of tensile properties of the additively manufactured and spark-plasma-sintered Ti-N alloys
• Electron beam additively manufactured Ti–1Al–8V–5Fe alloy: In-situ precipitation hardening, tensile properties and fracture characteristics
• Adaptive Concurrent Topology Optimization of Cellular Composites for Additive Manufacturing
• Adoption and Diffusion of Disruptive Technologies: The Case of Additive Manufacturing in Medical Technology Industry in Australia
• Effect of additive manufactured lattice defects on mechanical properties: an automated method for the enhancement of lattice geometry
• Metal injection moulding of surgical tools, biomaterials and medical devices: A review
• Migration of solidification grain boundaries and prediction
• Cuboid-like nanostructure strengthened equiatomic Ti–Zr–Nb–Ta medium entropy alloy
• Integrating data mining and machine learning to discover high-strength ductile titanium alloys
• Additive manufacturing of Ti-6Al-4V horizontal hollow struts with submillimetre wall thickness by laser powder bed fusion
• A Monte Carlo simulation-based approach to realistic modelling of additively manufactured lattice structures
• Grain refinement of stainless steel in ultrasound-assisted additive manufacturing
• Dissolution Kinetics of Iron-Based Intermetallic Compounds (τ5c IMCs) in a Commercial Steel Strip Metallic Alloy Coating Process
• 3D printed sandwich beams with bioinspired cores: Mechanical performance and modelling
• Laser powder bed fusion additive manufacturing (LPBF-AM): the influence of design features and LPBF variables on surface topography and effect on fatigue properties
• Effect of process parameters and grain refinement on hot tearing susceptibility of high strength aluminum alloy 2139 in laser powder bed fusion
• Identification of unusual large zones of Category I triple-alpha-variant clusters in additively manufactured Ti-4Al-2V alloy
• Microstructure modification of additive manufactured Ti-6Al-4V plates for improved ballistic performance properties
• Alloy solidification: Assessment and improvement of an easy-to-apply model
• Fatigue behaviour of laser powder bed fusion (L-PBF) Ti–6Al–4V, Al–Si–Mg and stainless steels: a brief overview
• Image-Based Geometrical Characterization of Nodes in Additively Manufactured Lattice Structures
• Near room-temperature formation of Cu3Sn: In-situ synchrotron X-ray diffraction characterization and thermodynamic assessments of its nucleation
• The effect of geometric design and materials on section properties of additively manufactured lattice elements
• Perspectives on additive manufacturing for dynamic impact applications
• Additive manufacturing of intricate lattice materials: Ensuring robust strut additive continuity to realize the design potential
• Heat treatment for metal additive manufacturing
• Effect of Geometric Design and Materials on Section Properties of Additively Manufactured Lattice Elements
• The Effect of PostProcessing on the Ductility and Strength of Ti-6Al-4V Lattice Materials
• Variant selection in additively manufactured alpha-beta titanium alloys
• A Digital-Twin Methodology for the Non-destructive Certification of Lattice Structures
• Characteristics of oxide films on Ti-(10–75)Ta alloys and their corrosion performance in an aerated Hank's balanced salt solution
• Extraordinary reinforcing effect of carbon nanotubes in aluminium matrix composites assisted by in-situ alumina nanoparticles
• Influence of deposition strategy on the microstructure and fatigue properties of laser metal deposited Ti-6Al-4V powder on Ti-6Al-4V substrate
• In situ hydrothermal transformation of titanium surface into lithium-doped continuous nanowire network towards augmented bioactivity
• Microstructural modification of recycled aluminium alloys by high-intensity ultrasonication: Observations from custom Al–2Si–2Mg–1.2Fe–(0.5,1.0)Mn alloys
• Additive Manufacturing—The 2nd Asia–Pacific International Conference on Additive Manufacturing (APICAM 2019)
• Ultra-High-Speed Laser Cladding of Stellite® 6 Alloy on Mild Steel
• Surface Engineering: Applications for Advanced Manufacturing
• Improved ballistic performance of additively manufactured Ti6Al4V with α-β lamellar microstructures
• Manufacturability of Ti-Al-4V Hollow-Walled Lattice Struts by Laser Powder Bed Fusion
• Recent Advances in the Design and Fabrication of Strong and Ductile (Tensile) Titanium Metal Matrix Composites
• Liquid metal dealloying of titanium-tantalum (Ti-Ta) alloy to fabricate ultrafine Ta ligament structures: A comparative study in molten copper (Cu) and Cu-based alloys
• Sintering of titanium in argon and vacuum: Pore evolution and mechanical properties
• Strength-ductility improvement of extruded Ti-(N) materials using pure Ti powder with high nitrogen solution
• Fabrication of highly porous titanium scaffolds using metal injection moulding and space holder
• Grain Refinement of Alloys in Fusion-Based Additive Manufacturing Processes
• High oxygen-content titanium and titanium alloys made from powder
• Microstructure and isothermal oxidation behavior of Nb-Ti-Si-based alloy additively manufactured by powder-feeding laser directed energy deposition
• Microstructure, tensile properties and deformation behaviors of aluminium metal matrix composites co-reinforced by ex-situ carbon nanotubes and in-situ alumina nanoparticles
• Non-destructive simulation of node defects in additively manufactured lattice structures
• Graphene-strengthened Inconel 625 Alloy Fabricated by Selective Laser Melting
• Titanium for consumer applications: Real world use of titanium
• Ductility improvement mechanism of pure titanium with excessive oxygen solid solution via rapid cooling process
• Effect of building direction on porosity and fatigue life of selective laser melted AlSi12Mg alloy
• A novel quaternary equiatomic Ti-Zr-Nb-Ta medium entropy alloy (MEA)
• Selective laser melting-fabricated Ti-6Al-4V alloy: Microstructural inhomogeneity, consequent variations in elastic modulus and implications
• Atomic Distance Tuning Effect for Nucleation in Liquid Iron
• Enabling the development of ductile powder metallurgy titanium alloys by a unique scavenger of oxygen and chlorine
• A comparative study of the effect of submicron porous and smooth ultrafine-grained Ti-20Mo surfaces on osteoblast responses
• Fundamental Understanding of the Dissolution of Oxide Film on Ti Powder and the Unique Scavenging Feature by LaB6
• Fabrication and anisotropic wettability of titanium-coated microgrooves
• Compositional design of strong and ductile (tensile) Ti-Zr-Nb-Ta medium entropy alloys (MEAs) using the atomic mismatch approach
• Impacts of defocusing amount and molten pool boundaries on mechanical properties and microstructure of selective laser melted AlSi10Mg
• Strong and Ductile Ti-6Al-4V Alloy Produced by Hot Pressing of Ti-6Al-4V Swarf
• Additively manufactured titanium artworks
• Tensile properties improvement by homogenized nitrogen solid solution strengthening of commercially pure titanium through powder metallurgy process
• In-situ and ex-situ synchrotron X-ray diffraction studies of microstructural length scale controlled dealloying
• Effect of ultrasonication on the solidification microstructure in al and mg-alloys
• Intensified texture in selective electron beam melted Ti-6Al-4V thin plates by hot isostatic pressing and its fundamental influence on tensile fracture and properties
• Effect of ultrasonic melt treatment on intermetallic phase formation in a manganese-modified Al-17Si-2Fe alloy
• Computational modelling of strut defects in SLM manufactured lattice structures
• Titanium springs and fasteners
• An introduction to titanium in consumer applications
• Atomic Structural Competition in the Al85.5Ni9.5La5 Alloy During Liquid-to-Solid Transition
• Grain refinement of additively manufactured stainless steel by ultrasound
• In situ doping and synthesis of two-dimensional nanomaterials using mechano-chemistry
• New insights into nickel-free superelastic titanium alloys for biomedical applications
• The Role of Ultrasonically Induced Acoustic Streaming in Developing Fine Equiaxed Grains During the Solidification of an Al-2 Pct Cu Alloy
• Titanium-Doped Copper-Diamond Composites Fabricated by Hot-Forging of Powder Mixtures or Cold-Pressed Powder Preforms
• Effect of geometry on the mechanical properties of Ti-6Al-4V Gyroid structures fabricated via SLM: A numerical study
• Experimental and numerical assessment of surface roughness for Ti6Al4V lattice elements in selective laser melting
• Effect of polygon order on additively manufactured lattice structures: a method for defining the threshold resolution for lattice geometry
• Grain structure control during metal 3D printing by high-intensity ultrasound
• Fabrication of the τ5c Intermetallic Compound Monoliths by a Novel Powder Metallurgy and Hot-Dipping Approach
• Fabrication of highly porous titanium scaffolds using metal injection moulding and space holder
• Fatigue Performance of Additively Manufactured Ti-6Al-4V: Surface Condition vs. Internal Defects
• Osteoblast Responses to Titanium-Coated Subcellular Scaled Microgrooves
• Spark Plasma Sintering of Ti-48Al-2Cr-2Nb Alloy Powder and Characterization of an Unexpected Phase
• 3D characterization of defects in deep-powder-bed manufactured Ti–6Al–4V and their influence on tensile properties
• SLM lattice structures: Properties, performance, applications and challenges
• Titanium in medical and dental applications
• Preface
• Influence of the laser pre-quenched substrate on an electroplated chromium coating/steel substrate
• Titanium background, alloying behavior and advanced fabrication techniques-An overview
• Ni-free superelastic titanium alloys for medical and dental applications
• Preface
• A Honeycomb-Structured Ti-6Al-4V Oil–Gas Separation Rotor Additively Manufactured by Selective Electron Beam Melting for Aero-engine Applications
• Layer Additive Production or Manufacturing of Thick Sections of Ti-6Al-4V by Selective Electron Beam Melting (SEBM)
• Selective laser melting of H13: microstructure and residual stress
• Light Alloys: Metallurgy of the Light Metals: Fifth Ed.
• Inconel 625 lattice structures manufactured by selective laser melting (SLM): Mechanical properties, deformation and failure modes
• The effect of ordered and partially ordered surface topography on bone cell responses: A review
• Metal Alloys for Fusion-Based Additive Manufacturing
• Selective Electron Beam Manufacturing of Ti-6Al-4V Strips: Effect of Build Orientation, Columnar Grain Orientation, and Hot Isostatic Pressing on Tensile Properties
• Reducing electric current and energy consumption of spark plasma sintering via punch configuration design
• New Development in Selective Laser Melting of Ti–6Al–4V: A Wider Processing Window for the Achievement of Fully Lamellar α + β Microstructures
• Grain refinement of binary Al-Si, Al-Cu and Al-Ni alloys by ultrasonication
• Zirconium Alloys for Orthopaedic and Dental Applications
• In situ tailoring microstructure in additively manufactured Ti-6Al-4V for superior mechanical performance
• In situ preparation of TiB nanowires for high-performance Ti metal matrix nanocomposites
• Microstructural development of electron beam processed Al-3Ti-1Sc alloy under different electron beam scanning speeds
• Sintering and Related Phenomena
• Advances in Sintering
• Characterization and decompositional crystallography of the massive phase grains in an additively-manufactured Ti-6Al-4V alloy
• High tensile-strength and ductile titanium matrix composites strengthened by TiB nanowires
• Selective electron beam manufactured Ti-6Al-4V lattice structures for orthopedic implant applications: Current status and outstanding challenges
• The β phase evolution in Ti-6Al-4V additively manufactured by laser metal deposition due to cyclic phase transformations
• Microwave processing of titanium and titanium alloys for structural, biomedical and shape memory applications: Current status and challenges
• Mechanical properties, in vitro corrosion resistance and biocompatibility of metal injection molded Ti-12Mo alloy for dental applications
• A detailed experimental assessment of microwave heating of titanium hydride powder
• Role of ultrasonic treatment, inoculation and solute in the grain refinement of commercial purity aluminium
• The Effect of Ultrasonic Melt Treatment on Macro-Segregation and Peritectic Transformation in an Al-19Si-4Fe Alloy
• Solidification of Aluminium Alloys Under Ultrasonication: An Overview
• Powder Metallurgy of Non-Ferrous Metals: Part I
• On the microstructural refinement in commercial purity Al and Al-10 wt% Cu alloy under ultrasonication during solidification
• Additive Manufacturing of Titanium Alloys
• The enabling role of dealloying in the creation of specific hierarchical porous metal structures—A review
• Metal injection moulding of non-spherical titanium powders: Processing, microstructure and mechanical properties
• Microstructure, Mechanical Properties, and Flatness of SEBM Ti-6Al-4V Sheet in As-Built and Hot Isostatically Pressed Conditions
• Toward Manufacturing Quality Ti-6Al-4V Lattice Struts by Selective Electron Beam Melting (SEBM) for Lattice Design
• Effect of Dy addition on microstructure and mechanical properties of Mg-4Y-3Nd-0.4Zr alloy
• Redefining the β-Phase Stability in Ti-Nb-Zr Alloys for Alloy Design and Microstructural Prediction
• Boron nitride nanotube reinforced titanium metal matrix composites with excellent high-temperature performance
• Enhanced Homogenization of Vanadium in Spark Plasma Sintering of Ti-10V-2Fe-3Al Alloy from Titanium and V-Fe-Al Master Alloy Powder Blends
• Initial crystallisation or nucleation in a liquid aluminium alloy containing spinel seeds
• Corrigendum to “Initial crystallisation or nucleation in a liquid aluminium alloy containing spinel seeds” [Materials Letters 196 (2017) 358–360](S0167577X17304317)(10.1016/j.matlet.2017.03.083)
• Porous titanium scaffolds fabricated by metal injection moulding for biomedical applications
• Metal injection moulding of titanium and titanium alloys: Challenges and recent development
• High-tensile-strength and ductile novel Ti-Fe-N-B alloys reinforced with TiB nanowires
• Additive manufacturing and postprocessing of Ti-6Al-4V for superior mechanical properties
• A perspective on the future of titanium powder metallurgy
• Comparison of spark plasma sintering of elemental and master alloy powder mixes and prealloyed Ti-6Al-4V powder
• Spark plasma sintering and hot pressing of titanium and titanium alloys
• Porous titanium structures and applications
• Scavenging of oxygen and chlorine from powder metallurgy (PM) titanium and titanium alloys
• Preface
• Pressureless sintering of titanium and titanium alloys: Sintering densification and solute homogenization
• Titanium powder metallurgy: Science, technology and applications
• Microwave sintering of titanium and titanium alloys
• Formation of anomalously large Al single crystals at triple points during pulsed electric current sintering (PECS) of Al86Ni6Y 4.5Co2La1.5 metallic glass
• Microstructure and Mechanical Properties of Long Ti-6Al-4V Rods Additively Manufactured by Selective Electron Beam Melting Out of a Deep Powder Bed and the Effect of Subsequent Hot Isostatic Pressing
• Distortion in a 7xxx aluminum alloy during liquid phase sintering
• A yttrium-containing high-temperature titanium alloy additively manufactured by selective electron beam melting
• Topological design and additive manufacturing of porous metals for bone scaffolds and orthopaedic implants: A review
• Comparison of electromagnetic and piezoelectric vibration energy harvesters with different interface circuits
• Trace Carbon in Biomedical Beta-Titanium Alloys: Recent Progress
• Novel synthesis and consolidation of powder materials
• Optical aptasensors for adenosine triphosphate
• Effect of Powder Reuse Times on Additive Manufacturing of Ti-6Al-4V by Selective Electron Beam Melting
• Ti-6Al-4V Additively Manufactured by Selective Laser Melting with Superior Mechanical Properties
• Hydrogenation and dehydrogenation kinetics of sponge titanium produced in Panzhihua
• Grain Refinement of an Al-2 wt%Cu Alloy by Al3Ti1B Master Alloy and Ultrasonic Treatment
• Effect of dispersion method on the deterioration, interfacial interactions and re-agglomeration of carbon nanotubes in titanium metal matrix composites
• Additive manufacturing of strong and ductile Ti-6Al-4V by selective laser melting via in situ martensite decomposition
• Variation in pore distribution along sample length in sintered 7xxx aluminum alloy
• Quantitative Analyses of MWCNT-Ti Powder Mixtures using Raman Spectroscopy: The Influence of Milling Parameters on Nanostructural Evolution
• Chemical heterogeneity-induced plasticity in Ti-Fe-Bi ultrafine eutectic alloys
• Fabrication of High Strength and Ductile Stainless Steel Fiber Felts by Sintering
• Combinatorial influence of bimodal size of B2 TiCu compounds on plasticity of Ti-Cu-Ni-Zr-Sn-Si bulk metallic glass composites
• The crystallographic features of τ3 phase in a powder metallurgy nickel-doped Ti-45Al-5Nb-0.2C-0.2B-1.25Ni alloy
• Concurrence of de-alloying and re-alloying in a ternary Al67Cu18Sn15 alloy and the fabrication of 3D nanoporous Cu-Sn composite structures
• Additive manufacturing of a high niobium-containing titanium aluminide alloy by selective electron beam melting
• Massive transformation in Ti-6Al-4V additively manufactured by selective electron beam melting
• A dealloying approach to synthesizing micro-sized porous tin (Sn) from immiscible alloy systems for potential lithium-ion battery anode applications
• The Influence of As-Built Surface Conditions on Mechanical Properties of Ti-6Al-4V Additively Manufactured by Selective Electron Beam Melting
• Synthetic genetic polymers: Advances and applications
• Enzyme Mimics: Advances and Applications
• Identifying and understanding the effect of milling energy on the synthesis of carbon nanotubes reinforced titanium metal matrix composites
• A transmission electron microscopy and three-dimensional atom probe study of the oxygen-induced fine microstructural features in as-sintered Ti-6Al-4V and their impacts on ductility
• Electrochemical dealloying of a ternary Al67Cu18Sn15 alloy compared with that of a binary Al75Cu25 alloy
• Creation of bimodal porous copper materials by an annealing-electrochemical dealloying approach
• Impacts of trace carbon on the microstructure of as-sintered biomedical Ti-15Mo alloy and reassessment of the maximum carbon limit
• Electrochemical nucleic acid biosensors: From fabrication to application
• Recent advances in grain refinement of light metals and alloys
• CFD modelling of nitrogen gas flow pattern during sintering of Al-7Zn-2.5Mg-1Cu alloy and its effect on distortion
• The Contribution of Constitutional Supercooling to Nucleation and Grain Formation
• Manipulation and Characterization of a Novel Titanium Powder Precursor for Additive Manufacturing Applications
• Metal Powder for Additive Manufacturing
• Selective laser melting (SLM) of AlSi12Mg lattice structures
• In Situ Synchrotron Radiation Study of TiH2-6Al-4V and Ti-6Al-4V: Accelerated Alloying and Phase Transformation, and Formation of an Oxygen-Enriched Ti4Fe2O Phase in TiH2-6Al-4V
• Novel fabrication of titanium by pure microwave radiation of titanium hydride powder
• Titanium carbide precipitation in Ti-22Nb alloy fabricated by metal injection moulding
• Comparison of different routes for production of CP- Ti powder compacts used as preform for forging of Con-rod
• Preface: PM titanium
• Novel ultrafine-grained aluminium metal matrix composites prepared from fine atomized Al powders
• Characteristics of microwave sintering of titanium powder compacts
• Powder metallurgy in Australasia
• A brief history of the development of grain refinement technology for cast magnesium alloys
• Chloride impurities in titanium powder metallurgy - A review
• Solidification of Cast Magnesium Alloys
• Novel Ultrafine-Grained Aluminium Metal Matrix Composites Prepared from Fine Atomized Al Powders
• Novel in-situ formed Al-AlN ultrafine-grained composites prepared from fine nitrided Al powders
• Selective electron beam melting of titanium and titanium aluminide alloys
• Significant α-phase growth confinement in Grade 4 titanium and substantial β-phase refinement in Grade 7 titanium
• Grain refinement of magnesium alloys: A review of recent research, theoretical developments, and their application
• Cobalt-doped Ti-48Al-2Cr-2Nb alloy fabricated by cold compaction and pressureless sintering
• The effect of grain size on the tensile and creep properties of Mg-2.6Nd-0.35Zn-xZr alloys at 250°C
• The effect of a small addition of nickel on the sintering, sintered microstructure, and mechanical properties of Ti-45Al-5Nb-0.2C-0.2B alloy
• Devising MIMO arrays for underwater 3-D short-range imaging
• Impurity (Fe, Cl, and P)-induced grain boundary and secondary phases in commercially pure titanium (CP-Ti)
• Metal injection moulding of in-situ formed AlN hollow sphere reinforced Al matrix syntactic foam parts
• Abnormal crystallization in Al86Ni6Y 4.5Co2La1.5 metallic glass induced by spark plasma sintering
• Selective chemical dealloying for fabrication of surface porous al88cu6si6 eutectic alloy
• The role of ultrasonic treatment in refining the as-cast grain structure during the solidification of an Al-2Cu alloy
• Microwave heating, isothermal sintering, and mechanical properties of powder metallurgy titanium and titanium alloys
• The critical role of heating rate in enabling the removal of surface oxide films during spark plasma sintering of Al-based bulk metallic glass powder
• Impurity scavenging, microstructural refinement and mechanical properties of powder metallurgy titanium and titanium alloys by a small addition of cerium silicide
• The effect of a small addition of boron on the sintering densification, microstructure and mechanical properties of powder metallurgy Ti-7Ni alloy
• Nanoscaled Al-AlN composites consolidated by equal channel angular pressing (ECAP) of partially in situ nitrided Al powder
• Enhanced sintering of pre-alloyed binary TiAl powder by a small addition of iron
• Microstructure and mechanical behavior of metal injection molded Ti-Nb binary alloys as biomedical material
• Micrometer-sized quasicrystals in the Al 85Ni 5Y 6Co 2Fe 2 metallic glass: A TEM study and a brief discussion on the formability of quasicrystals in bulk and marginal glass-forming alloys
• In situ synchrotron radiation to understand the pathways for the scavenging of oxygen in commercially pure Ti and Ti-6Al-4V by yttrium hydride
• SAP-like ultrafine-grained Al composites dispersion strengthened with nanometric AlN
• A brief history of the grain refinement of cast light alloys
• Calibration of temperature measurement by infrared pyrometry in microwave heating of powder materials: An exothermic reaction based approach
• Microstructure and elevated temperature mechanical and creep properties of Mg-4Y-3Nd-0.5Zr alloy in the product form of a large structural casting
• Self-assembled, aligned TiC nanoplatelet-reinforced titanium composites with outstanding compressive properties
• Design of low cost high performance powder metallurgy titanium alloys: Some basic considerations
• Modification of the α-Ti laths to near equiaxed α-Ti grains in as-sintered titanium and titanium alloys by a small addition of boron
• The sintering densification, microstructure and mechanical properties of gamma Ti-48Al-2Cr-2Nb alloy with a small addition of copper
• Fabrication of 10mm diameter fully dense Al86Ni6Y4.5Co2La1.5 bulk metallic glass with high fracture strength
• Review of effect of oxygen on room temperature ductility of titanium and titanium alloys
• Applied pressure on altering the nano-crystallization behavior of Al 86Ni6Y4.5Co2La1.5 metallic glass powder during spark plasma sintering and its effect on powder consolidation
• Warm die compaction and sintering of titanium and titanium alloy powders
• Titanium carbide precipitation in Ti-22Nb alloy fabricated by metal injection moulding
• The effect of lanthanum boride on the sintering, sintered microstructure and mechanical properties of titanium and titanium alloys
• A correlation between failure angle and constituent for Al-AlN composites under uniaxial tensile conditions
• Thermal and mechanical properties of Cu60-xZr 25Ti15Nix bulk metallic glasses with x=0, 1, 3, 5, 7, 9 and 11 at.%
• Novel in-situ formed Al-AlN ultrafine-grained composites prepared from fine nitrided Al powders
• Preface
• An approach to assessing ultrasonic attenuation in molten magnesium alloys
• Formation of aluminum nitride during sintering of aluminum
• Sintering of titanium and its alloys
• Electron beam processing of aluminium alloys
• Formation of aluminium nitride during sintering of powder injection moulded aluminium
• Grain nucleation and formation in Mg-Zr alloys
• Cold compaction and sintering of titanium and its alloys for near-net-shape or preform fabrication
• The effect of isothermal sintering time on the sintered microstructure and mechanical properties of Ti-3Ni-(3-4)Si alloys
• The effect of hydrogen on the sintering of PM aluminium alloys
• Sintering of titanium alloys for net-shape applications
• AL-ALN composites consolidated from partially nitrided aluminium alloy powders by equal channel angular pressing (ECAP)
• An inverse growth restriction model for predicting solidified grain size
• New infiltration patterns during pressureless infiltration of partially nitrided aluminium preforms
• Aluminium powder metallurgy
• Sintering of gamma titanium aluniinide (tial) alloys aided by small additions of copper
• Some new development in titanium powder metallurgy
• Sintering of Ti-10V-2Fe-3Al and mechanical properties
• The sintering, sintered microstructure and mechanical properties of Ti-Fe-Si alloys
• The effect of solute on ultrasonic grain refinement of magnesium alloys
• In situ fabrication and mechanical properties of AlAlN composite by hot extrusion of partially nitrided AA6061 powder
• The influence of topological structure on bulk glass formation in Al-based metallic glasses
• Crystallization behaviour and thermal stability of two aluminium-based metallic glass powder materials
• Microwave sintering of titanium
• TEM and XRD characterisation of commercially pure α-Ti made by powder metallurgy and casting
• The characteristics of heterogeneous nucleation on concave surfaces and implications for directed nucleation or surface activity by surface nanopatterning
• In situ TEM observations of unusual nanocrystallization in a Ti-based bulk metallic glass
• Introduction to the interdependence theory of grain formation and its application to aluminium, magnesium and titanium alloys
• Pressureless infiltration and resulting mechanical properties of Al-AlN preforms fabricated by selective laser sintering and partial nitridation
• An analytical model for constitutional supercooling-driven grain formation and grain size prediction
• On the infiltration mode during fabrication of aluminium composite
• Microstructural assessment of the oxidation behavior of Cu-based metallic glass powder
• Microstructural characteristics of electron beam processed Al-2Sc
• Fabrication of porous aluminum with controllable open-pore fraction
• Sintering of titanium with yttrium oxide additions for the scavenging of chlorine impurities
• Heterogeneous nucleation and grain formation on spherical and flat substrates
• Sintering of titanium in vacuum by microwave radiation
• Non-isothermal crystallization kinetics and mechanical properties of Al 86Ni 6Y 4.5Co 2La 1.5 metallic glass powder
• Simultaneous gettering of oxygen and chlorine and homogenization of the β phase by rare earth hydride additions to a powder metallurgy Ti-2.25Mo-1.5Fe alloy
• Electron beam processing of Al-2Sc alloy for enhanced precipitation hardening
• Secondary phases and interfaces in a nitrogen-atmosphere sintered Al alloy: Transmission electron microscopy evidence for the formation of AlN during liquid phase sintering
• The surface structure of gas-atomized metallic glass powders
• The effect of Si additions on the sintering and sintered microstructure and mechanical properties of Ti-3Ni alloy
• The Interdependence Theory: The relationship between grain formation and nucleant selection
• Formation of aluminium nitride during sintering of powder injection moulded aluminium
• Microwave-assisted fabrication of titanium hollow spheres with tailored shell structures for various potential applications
• The effects of sample position and gas flow pattern on the sintering of a 7xxx aluminum alloy
• Solidification of nitrogen-atomized Al86Ni6Y 4.5Co2La1.5 metallic glass
• The effect of the gas atmosphere on the response of the Al 86Ni 6Y 4.5Co 2La 1.5 metallic glass powder to heating
• Sintering of aluminium and its alloys
• Effect of iron on grain refinement of high-purity Mg-Al alloys
• Grain refinement of commercial purity Mg-9%Al alloys by superheating
• Application of edge-to-edge matching model to grain refinement in Mg-Al based alloys
• Investigation of intermetallics in magnesium die-casting sludge
• Effect of soluble and insoluble zirconium on the grain refinement of magnesium alloys
• Intermetallic morphology development in AM60 alloy
• AMC-SC1: An elevated temperature magnesium alloy suitable for precision sand casting of powertrain components
• Grain refinement of pure magnesium using rolled Zirmax® Master alloy (MG-33.3ZR)
• As-cast microstructure in VDC cast AA 6082 billet
• The effect of manganese on the grain size of commercial AZ31 alloy
• Zirconium alloying and grain refinement of magnesium alloys
• Influence of zinc on the soluble zirconium content in magnesium and the subsequent grain refinement by zirconium
• Grain refinement of magnesium alloys by ultrasonic vibration
• Controlling the semisolid grain size during solidification
• Grain refinement of magnesium-aluminium alloys by iron inoculation
• Rapid prototyping of aluminium alloy parts: The effect of infiltration atmosphere
• Solidification of cast magnesium alloys
• Alloying of pure magnesium with Mg - 33.3 wt-%Zr master alloy
• Sintering of titanium powder compacts for containerless hot isostatic pressing
• New approach to analysis of grain refinement
• Semisolid processing characteristics of AM series Mg alloys by rheo-diecasting
• Grain coarsening of magnesium alloys by beryllium
• Heterogeneous nucleation on potent spherical substrates during solidification
• Grain refinement of magnesium alloys by zirconium: Formation of equiaxed grains
• The effects of rheo-diecasting on the integrity and mechanical properties of Mg-6Al-1Zn
• Microstructure and mechanical properties of a Rheo-diecast Mg-10Zn-4.5Al alloy
• Potency of high-intensity ultrasonic treatment for grain refinement of magnesium alloys
• Cyclic overaging pre-weld heat treatment of Rene 80: Effect of solution treatment and end aging temperatures
• Characteristic zirconium-rich coring structures in Mg-Zr alloys
• Heterogeneous nuclei size in magnesium-zirconium alloys
• Native grain refinement of magnesium alloys
• The creep behaviour of rheo-diecast AZ91D (Mg-9Al-1Zn) alloy
• Effect of manganese on grain refinement of Mg-Al based alloys
• Ultrasonic refinement of magnesium by cavitation: Clarifying the role of wall crystals
• Grain refinement of magnesium alloys
• On the solidification microstructure of Mg-30Zn-2.5Y metal-intermetallic alloy
• A new analytical approach to reveal the mechanisms of grain refinement
• Cyclic overaging heat treatment for ductility and weldability improvement of nickel based superalloys
• The loss of dissolved zirconium in zirconium-refined magnesium alloys after remelting
• AMC-SC1: A new magnesium alloy suitable for powertrain applications
• Heterogeneous nucleation on convex spherical substrate surfaces: A rigorous thermodynamic formulation of Fletcher's classical model and the new perspectives derived
• Phase equilibria and solidification of Mg-rich Al-Mg-Si alloys
• Author's reply
• Crystallography of grain refinement in Mg-Al based alloys
• Uptake of iron and its effect on grain refinement of pure magnesium by zirconium
• Creation of semisolid slurries containing fine and spherical particles by grain refinement based on the Mullins-Sekerka stability criterion
• The in-situ fabrication of Ai-A1N composites from metal powders and their resistance to wear and cavitation
• Discussions on grain refinement of magnesium alloys by carbon inoculation
• Mechanism for grain refinement of magnesium alloys by superheating
• High-intensity ultrasonic grain refinement of magnesium alloys: Role of solute
• Effect of heat treatment on microstructure and properties of medium Mn white cast iron
• Non-linear capillary shape evolution of rod morphologies via interfacial diffusion
• Study on continuous change of carbide morphology during high temperature holding of Fe-C alloy
• Formation of the secondary cementite network in low alloy white cast iron
• Impact-abrasion behavior of low alloy white cast irons
• On the breakup of the eutectic carbide network in white cast iron
• Thermodynamic considerations of the equilibrium shape of an infinitely long rod
• In-situ observations of the dissolution of carbides in an Fe-Cr-C alloy
• On the disappearance of Mo2C during low-temperature sintering of Ti(C,N)-Mo2C-Ni cermets
• Coating molybdenum on fine Ti(C,N) powder
• Formation of spheroidal carbide in vanadium white cast iron by rare earth modification
• Modification of hypoeutectic low alloy white cast irons
• On the Gibbs-Thomson effect in concentrated binary systems
• Development of surface-hardened ductile cast iron and its use as a erosion wear-resistant material
• Phase stability of microfine Mo2C phases in high vacuums
• Re-evaluation of the experimental results reported by Miyazaki et al. on the Gibbs-Thomson effect
• Breakup of eutectic carbide network of white cast irons at high temperatures
• On the critical instability wavelengths of rod morphologies containing an arbitrary sinusoidal perturbation
• Mechanism of post-weld heat treatment cracking in Rene 80 nickel based superalloy
• On the fabrication of steel-wire-reinforced white cast irons
• A model for the breakup of rod morphologies
• Microstructural evolution in the phase mixtures of Ti(C,N)-Mo at 1600°C
• Coarsening of intermetallic or compound precipitates in binary systems
• Surface hardening of ductile cast iron using stainless steel
• Settling of undissolved zirconium particles in pure magnesium melts
• Thermodynamic considerations of the instability of rod morphologies
• The Gibbs-Thomson effect in dilute binary systems
• A practical method for identifying intermetallic phase particles in aluminium alloys by electron probe microanalysis
• Understanding the superior mechanical properties of hollow-strut metal lattice materials
• Phase transformation induced twinning in commercially pure titanium: An in-situ study
• Post-yield softening of bending-dominated metal metamaterials
• The Gibson-Ashby model for additively manufactured metal lattice materials: Its theoretical basis, limitations and new insights from remedies
• Node-reinforced hollow-strut metal lattice materials for higher strength
• Manufacturability of Ti-6Al-4V Hollow-Walled Lattice Struts by Laser Powder Bed Fusion
• Analysing the effect of defects on stress concentration and fatigue life of L-PBF AlSi10Mg alloy using finite element modelling
• Microstructural characterisation and mechanical evaluation of Ti-15Mo manufactured by laser metal deposition
• Strong and ductile titanium–oxygen–iron alloys by additive manufacturing
• Fatigue test data applicability for additive manufacture: A method for quantifying the uncertainty of AM fatigue data
• Ti-6Al-4V hollow-strut lattice materials by laser powder bed fusion
• A virtual stylus method for non-destructive roughness profile measurement of additive manufactured lattice structures
• Additively manufactured Ti–6Al–4V alloy by high magnetic field heat treatment
• Ultralight, ductile metal mechanical metamaterials with super elastic admissible strain (0.1)
• Low-density, high-strength metal mechanical metamaterials beyond the Gibson-Ashby model
• Excellent tensile yield strength with ultrafine grain and tailored microstructure in plastically deformed Ti–Re alloys
• Fatigue Life of Laser Powder Bed Fusion (L-Pbf) Alsi10mg Alloy: Effects of Surface Roughness and Porosity
• Massive transformations in titanium alloys: Role of relative orientation of adjacent parent grains
• Laser directed energy deposition of Ti-1Al-8V-5Fe alloy: From zero to significant tensile plasticity
• Melt pool dynamics on different substrate materials in high-speed laser directed energy deposition process
• Titanium Multi‐Topology Metamaterials with Exceptional Strength
• In-situ elimination of β-flecks in additively manufactured Ti-3.5 wt% Fe alloy
• AlSi10Mg hollow-strut lattice metamaterials by laser powder bed fusion